Advanced Keys AK-104 Manual do Utilizador descarregar pdf (Página 4)

3. Ignition Controlled Door Lock/Unlock Function

Ignition lock function will automatically lock the doors when the brake is applied 10 seconds after

vehicle started. Doors will automatically unlock when the ignition is turned OFF. For security reason

the vehicle will not unlock if ignition is turned OFF in less than 2 minutes after turned ON. Follow the

Programmable Features instruction under the Smart Key Installation manual to disable/enable this

function.

4. Door-Not-Closed Reminder Function

Leaving Smart Key sensing range with the doors open or ajar will trigger the Door Not Closed

Reminder Function. Vehicle will double-chirp horn and flash parking lights 3 times to warn driver that

one or more doors are not closed. If doors remain open after the warning, system will lock the doors

regardless. Parking lights will continue to flash for additional two (2) minutes however, vehicle will be

armed and the engine start will be disabled.

To disable/enable this function: with door open, switch Ignition to ACC, depress and hold brake pedal

then press and hold the REMOTE START and UNLOCK together for 2 seconds until horn

honks. Vehicle will honk once if function is enabled or twice if disabled.

5. Key-Not-Found Reminder Function

If vehicle door is open-then-closed while it’s running it will trigger system to search for the Smart Key

6 seconds after the brake is applied. Vehicle will do nothing if Smart Key is found. If Smart Key is not

located, vehicle will double-chirp the horn and flash the parking lights 3 times. This to remind the

current driver that the Smart Key is no longer detected and it needs to be present in the vehicle before

it is driven to another location. Without the Smart Key, once the vehicle is turned off it will not be able

to start again. However the bypass transponder could be used for START in this case.

To disable/enable this function: with door open, switch Ignition to ACC, depress and hold brake pedal

then press and hold the REMOTE START and LOCK together for 2 seconds until horn honks.

Vehicle will honk once if function is enabled or twice if disabled.

6. Shock Sensor or Manual Unlock Trigger Function

Any impacts, jostles to your car while armed will trigger the shock sensor to respond. Depending on

the severity of the shock, the system can react to a full shock by trigger the alarm function or it

responds to a lighter shock (30% of the strength of a full shock) and giving a warn-away alarm by

honk and flash parking lights 5 times. To acknowledge and stop a shock triggered alarm, approach

the vehicle with a Smart Key or press LOCK or UNLOCK .

Optionally the shock sensor can be set to trigger the Unlock function instead of alarm function. In this

mode the Smart Key will NOT unlock doors automatically when Smart Key is in range and depending

on the shock sensor position and sensitivity, a light impact or tap on the vehicle will trigger the shock

sensor to unlock the doors while Smart Key is in the sensing range.

Note: By default the Shock Sensor will used for the alarm function and it’s disabled when vehicle is remote started.

To enable/disable this function: with door closed, switch Ignition to ACC, apply the brake and press

LOCK 2x then press and hold REMOTE START and UNLOCK together for 2 seconds until

horn honks. Vehicle will honk once if function is enabled or twice if disabled.

7. Auxiliary Function

If applicable the REMOTE START could be programmed to trigger an external function instead

remote start. Press and hold the REMOTE START for 3 seconds to activate the AUX Function.

To disable/enable this function: with door closed, switch Ignition to ACC, apply the brake and press

LOCK 3x then press and hold REMOTE START and UNLOCK together for 2 seconds until

horn honks. Vehicle will honk once if function is enabled or twice if disabled.

8. Vehicle Battery Power Saver Function

System will reduce Smart Keys search frequency after 7 days of inactivity to conserve vehicle battery.

In this state, the Smart Key sensitivity will be reduced and it takes longer (8–10 seconds) to identify

the Smart Key or the Bypass Transponder Card. Press the UNLOCK button once will also exit the

Power Saver mode.

9. Auto Windows Closing (Optional Module)

If window closer module is installed, windows and sunroof left open will be closed in sequenced when

vehicle is armed / locked.

1 2 3 4 5 6 7

Comentários a estes Manuais

Sem comentários

Advanced Keys AK-104 Manual do Utilizador Página 4

Comentários a estes Manuais